Jeep Wrangler
X409-WRA-JL 20200825v1
8/29
Factory Unit Disassembly Process
1 As a precautionary measure it’s a good idea to
mask out the dashboard and panels to prevent
scratches.
2 Unsnap the 6 clips and remove the knee panel
under the steering wheel using a panel removal
tool.
3 The locations of the 6 clips from the previous step. 4 Unsnap 10 clips, unplug the 2 harnesses, and
remove HVAC panel using a panel removal tool.
5 Locations of the clips and harnesses of the HVAC
controls from the previous step.
6 Use #2 Phillips Screwdriver to extract (2) screws
from the bottom of the radio bezel.
To Next Page
Loading...
