3.1.7
Selecting a location on the map
To select a map location, perform the following steps:
1.
Locate your destination on the map. Move and scale the map as necessary.
2.
Tap the location that you want to select as your destination. The cursor ( ) appears
there.
3.
(optional) If needed, tap to list the Places near the selected point or to
save this location.
Tip!
If you already have a planned route, tap
and
to add the selected location to your route.
4.
Tap to select the cursor as the destination.
5.
The route is calculated and the map appears showing the entire route, where you can check
route information and route alternatives. Tap to modify the route
parameters, or tap to start your journey.
To Next Page
Loading...
