EasyManua.ls Logo

Alsapan 535584 - User Manual

Alsapan 535584
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ZI du Petit Breuil
23100 LA COURTINE
NOTICE DE MONTAGE
ASSEMBLY INSTRUCTIONS
MONTAGEANLEITUNG
ISTRUZIONI DI MONTAGGIO
INSTRUCOES DE MONTAGEM
INSTRUCCIONES DE MONTAJE
UPUTE ZA MONTAZU
MONTAJ TALIMATI
MONTAGE-
INSTRUCTIES
رﯾرﺳﻟا ﻊﯾﻣﺟﺗ تﺎﻣﯾﻠﻌﺗ
Attention aux risques de se trouver coincé entre le lit et le mur.
Respectez les distances, elles doivent être égal ou
inférieur à
75
ou supérieur à
230
mm
.
Veillez à serrer correctement les différents éléments
de fixation, vérifiez régulièrement leur bon serrage.
Lors d'un déménagement ne pas démonter les pièces encollées.
Dimensions du matelas
: 200x90x15 cm de hauteur maximum.
En cas de détérioration ou manque d'une pièce, ne plus utiliser ce
couchage et se mettre en relation avec le magasin distributeur.
Attention aux risques de laisser ou d'attacher dans le lit des éléments
tels que, cordon, ceinture, ficelle qui représenteraient un risque
d'étranglement pour l'enfant.
IMPORTANT :
Veuillez conserver cette notice pour une consultation ultérieure.
Le lit surélevé ne convient pas pour les enfants
de moins de six ans, en raison du risque
de blessures liées à des chutes.
IMPORTANT - LIRE ATTENTIVEMENT - A CONSERVER POUR REFERENCE ULTERIEURE.
ﻞﺒﻘﺘﺴﻤﻟا ﻲﻓ ﻊﺟﺮﻤﻛ ﻪﺑ ﻆﻔﺘﺣا - ﺔﻳﺎﻨﻌﺑ أﺮﻗا - مﺎﻫ
Hauteur maxi. matelas
(voir marquage sur pan de lit)
CONFORME AUX EXIGENCES DE SECURITE DE LA NORME :
EN 747-1-2(2012+A1 2015)
2:30
Suivre les instructions d'assemblage en utilisant les outils indiqués.
Dimensions du matelas
: 200x90x15 cm de hauteur maximum.
Il est nécessaire de ventiler la pièce afin de maintenir un niveau peu élevé d'humidité et
d'empêcher le développement de moisissure dans le lit et autour de celui-ci.
Veillez à serrer correctement les différents éléments de fixation, vérifiez régulièrement
leur bon serrage.
Afin d'éviter tous risques d'humidité pouvant provoquer
le developpement de moisissure,
ventiler régulièrement votre pièce.
A
AVERTISSEMENT:
- S'il n'est pas utilisé correctement, le lit surélevé peut présenter
un sérieux risque de blessure par étranglement.
Ne jamais attacher ou suspendre des éléments à des parties
du lit surélevé qui ne sont pas destinés à être utilisés avec
le dit lit. Ces éléments comprennent, sans toutefois s'y limiter,
les cordes, les ficelles, les cordons, les crochets,
les ceintures et les sacs.
- Les enfants peuvent se retrouver coincés entre le lit et un mur,
une partie d'un toit incliné, le plafond, des meubles adjacents
(par exemple, des placards) ou autre. Pour éviter tout risque
de blessure grave, la distance entre la barrière de sécurité
supérieure et les éléments environnants ne doit pas dépasser 75 mm ou doit être supérieure à 230 mm.
Ne pas utiliser le lit surélevé si une pièce de la structure est manquante ou cassée,
et se mettre en relation avec le magasin distributeur.
Réf. 561815-535584
Décor imitation chêne relief/blanc
ضﯾﺑأ/طوﻠﺑﻟا رﯾﺛﺄﺗ دﯾﻠﻘﺗ
Réf. 535589
Décor imitation chêne relief/jaune
رﻔﺻأ/طوﻠﺑﻟا رﯾﺛﺄﺗ دﯾﻠﻘﺗ
Réf. 535585
Décor imitation chêne relief/bleu
ق رزأ/طوﻠﺑﻟا رﯾﺛﺄﺗ دﯾﻠﻘﺗ
Réf. 549001
Décor imitation chêne argile/gris
ي دﺎﻣر/طوﻠﺑﻟا رﯾﺛﺄﺗ دﯾﻠﻘﺗ
Réf. 535586
Décor imitation chêne relief/corail
ﻲﻧﺎﺟرﻣ/طوﻠﺑﻟا رﯾﺛﺄﺗ دﯾﻠﻘﺗ
Réf. 566729
Décor blanc pur
ﻲﺟﻠﺛ ضﯾﺑأ روﻛﯾد
Lit surélevé-ﻊﻔﺗرﻣ رﯾرﺳ
-1/35-
535584-535585-535586-535589-549001-561815-566729/1
Question and Answer IconNeed help?

Do you have a question about the Alsapan 535584 and is the answer not in the manual?

Overview

This document is an assembly and user manual for a loft bed with an integrated desk and storage, manufactured by ALSAPAN. The product reference is 561815-535584.

Function Description

This device is a multi-functional loft bed designed to optimize space in a child's room. It combines a sleeping area at an elevated height with a desk and various storage compartments underneath and alongside. The integrated desk can be pulled out for use and pushed back in to save space. The storage includes shelves and drawers, offering practical solutions for organizing books, toys, and other personal items. The design aims to provide a compact and efficient solution for sleeping, studying, and storage in smaller living spaces.

Important Technical Specifications

The loft bed is designed for a mattress with dimensions of 200x90x15 cm. The maximum height for the mattress is 15 cm. The maximum weight capacity for the bed is 75 kg, or a child weighing 230 mm or more. This seems to be a typo in the original document, likely intending to state a minimum height for the user or a maximum weight for the bed. Given the context of child safety, it's more probable that the 75 kg refers to the maximum weight the bed can support, and the 230 mm refers to a minimum height for the user to safely use the bed, or it could be a misprint for a different unit of measurement. The overall dimensions of the assembled bed are not explicitly stated in a single section but can be inferred from the component list and assembly diagrams. The main components include various panels with lengths up to 2030 mm and widths up to 930 mm, with thicknesses ranging from 1.2 mm to 100 mm. The bed is constructed primarily from wood-based panels, with various finishes indicated by reference numbers (e.g., "chêne relief" - embossed oak, "blanc" - white, "argile" - clay, "corail" - coral, "bleu" - blue, "gris" - grey, "jaune" - yellow). The hardware includes a variety of screws, dowels, cam locks, and other fasteners. Specific quantities and dimensions are provided for each type of hardware. For example:

  • A: Ø8x30 mm dowels (39x)
  • B: Ø8x40 mm dowels (13x)
  • C: Ø8x50 mm dowels (13x)
  • D: Ø6x11 mm screws (28x)
  • E: Ø7x48 mm screws (23x)
  • F: M4x15 mm screws (17x)
  • G: M4x12 mm screws (12x)
  • H: M4x20 mm screws (5x)
  • I: Ø4x40 mm screws (4x)
  • J: Ø4x17 mm screws (5x)
  • K: Ø3x20 mm screws (4x)
  • L: Ø3x30 mm screws (8x)
  • N: Cam locks (56x)
  • O: Cam lock covers (18x)
  • P: Wood glue (1x)
  • R: L=48 mm brackets (4x)
  • S: L=45 mm brackets (1x)
  • T: L=47 mm brackets (1x)
  • U: L=24 mm brackets (23x)
  • V: L=20 mm brackets (23x)
  • W: L=17 mm brackets (4x)
  • X: L-shaped brackets (2x)
  • Y: Plastic rings (12x)
  • Z: Hinges (1x)
  • B1: Casters with brake (4x)
  • C1: Casters (2x)
  • D1: Casters (2x)
  • M: L=30 mm screws (8x)

The bed is designed to be assembled by two people, as indicated by the pictogram.

Usage Features

The bed is intended for children aged six years and older. The elevated sleeping platform requires careful use, especially when getting in and out of bed. The integrated desk is designed to be extendable, providing a workspace when needed and allowing for space-saving when pushed in. The various shelves and drawers offer convenient storage for personal belongings, helping to keep the room tidy. The casters on the desk allow for easy movement and positioning. Some casters are equipped with brakes for stability. The bed is designed for indoor use only.

Maintenance Features

General Maintenance:

  • Dust regularly with a soft, dry cloth.
  • For stubborn dirt and light soap solution, clean the furniture, then wipe with a dry cloth.
  • Do not use abrasive cleaning agents, solvents, or polishing products.
  • Do not get the furniture too wet.

Assembly and Safety Checks:

  • Never force the connections during assembly.
  • Check all connections and fasteners regularly (every few days after assembly, then periodically) to ensure they remain tight.
  • If any parts are missing or damaged, contact the distributor for replacements.
  • Ensure proper ventilation in the room to maintain a suitable humidity level and prevent damage to the furniture.
  • The bed should be placed on a flat, stable surface.
  • The mattress should not exceed the maximum height of 15 cm to ensure the safety barrier is effective.
  • Regularly check for any loose screws, bolts, or other fasteners and tighten them as necessary.
  • Inspect the bed for any signs of wear or damage, especially to the structural components and safety barriers.
  • Do not use the bed if any part is broken, torn, or missing.
  • The bed is not suitable for children under six years of age due to the risk of falls.
  • Children can become trapped between the bed and the wall, or between the bed and other furniture. To prevent this, ensure a minimum distance of 75 mm or a maximum distance of 230 mm between the bed and any other furniture or wall. This is a critical safety instruction to prevent entrapment hazards.
  • Do not use replacement parts other than those supplied by the manufacturer or distributor.
  • The bed must be assembled by an adult.
  • The bed complies with EN 747-1-2(2012+A1 2015) safety standards.

Alsapan 535584 Specifications

General IconGeneral
BrandAlsapan
Model535584
CategoryIndoor Furnishing
LanguageEnglish