Assembly of thAssembly of th
© ALSTOM 2010. All rights reserved. Informat© ALSTOM 2010. All rights reserved. Informat
ion contained in ion contained in
this document is indicative only. No this document is indicative only. No
given or should given or should
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It isrelied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabiliprovided without liabili
is subject to is subject to
change without notice. Reproduction, use or disclosure to change without notice. Reproduction, use or disclosure to
third parties, without express writtthird parties, without express writt
en authority, isen authority, is
strictly prohibited.strictly prohibited.
Fastening onto theFastening onto the
ground wtth spacersground wtth spacers
= IPB axis to the ground= IPB axis to the ground
Using a telescopic sight, level the circuit breaker assembly by adjusting,Using a telescopic sight, level the circuit breaker assembly by adjusting,
and tighten to torqand tighten to torq
= Distance between phases := Distance between phases :
: beams fitte: beams fitte
d with 2 feets and with 2 feets an
: beams fitted with 3 feets and 3 s: beams fitted with 3 feets and 3 s
Circuit-breakerCircuit-breaker
General arrangementGeneral arrangement
CORRECT ADJUSTMENT CCORRECT ADJUSTMENT C
TIONS THE CORRECT FUNCTION-TIONS THE CORRECT FUNCTION-
ING OF THE EQUIPMENT.ING OF THE EQUIPMENT.
Continued on next page.Continued on next page.
To Next Page
Loading...
