Alstom FKG1X - Page 125

InstallationInstallation
Assembly of thAssembly of th
e circuit be circuit b
reaker on-reaker on-
--
sitesite
G31--201EN12G31--201EN12
8/208/20
04--201104--2011
© ALSTOM 2010. All rights reserved. Informat© ALSTOM 2010. All rights reserved. Informat
ion contained in ion contained in
this document is indicative only. No this document is indicative only. No
representatirepresentati
on or on or
warrantwarrant
y is y is
given or should given or should
bebe
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It isrelied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabiliprovided without liabili
ty and ty and
is subject to is subject to
change without notice. Reproduction, use or disclosure to change without notice. Reproduction, use or disclosure to
third parties, without express writtthird parties, without express writt
en authority, isen authority, is
strictly prohibited.strictly prohibited.
 GRID GRID
Installing Installing
the circuitthe circuit
--
--
breaker -breaker -
- -
Step 1,Step 1,
continuedcontinued
Removal of transportRemoval of transport
tools.tools.
Remove the 2 or 4 retaining brackets used during transport.Remove the 2 or 4 retaining brackets used during transport.
x2x2
 N/F/X N/F/X
XP/XV/XWXP/XV/XW
x4x4
Remove coversRemove covers
Remove Remove
the the
covers covers
by by
attaching attaching
slings slings
to to
the the
lifting lifting
rings rings
(see (see
G31-G31-
-08.).-08.).
G31--080G31--080
Dismantling and reassemblyDismantling and reassembly
of the metal enclosure coversof the metal enclosure covers
(FKG1N/F).(FKG1N/F).
G31--082G31--082
Dismantling and reassemblyDismantling and reassembly
of the metal enclosure coversof the metal enclosure covers
(FKG1XP/XV/XW).(FKG1XP/XV/XW).
Precaution, after cov-Precaution, after cov-
ers removalers removal
ALL PRALL PR
ECAUTECAUT
IONION
SHALL SHALL
BEBE
TT
AKENAKEN
AFTERAFTER
COVERCOVER
S REMOVS REMOV
AL FORAL FOR
PROTECPROTEC
TION OF THE EQUIPMENTION OF THE EQUIPMEN
T LOCAT LOCA
TED INSIDETED INSIDE
OF THEOF THE
ENCLO-ENCLO-
SURE.SURE.
CAUTION! :CAUTION! :
IT’S FORBIDDEN TO STEP ON OR PRESS THE INTERNALIT’S FORBIDDEN TO STEP ON OR PRESS THE INTERNAL
PART OF THE ENCLOSURE.PART OF THE ENCLOSURE.
Continued on next page.Continued on next page.