Alstom FKG1X - Page 237

Maintenance
Disassembly and assembly of the GCB equipments
G51
-
-5
00EN01
6/10
02--2011
© ALSTOM 2010. All rights reserved. Informat
ion contained in
this document is indicative only. No
representati
on or
warrant
y is
given or should
be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabili
ty and
is subject to
change without notice. Reproduction, use or disclosure to
third parties, without express writt
en authority, is
strictly prohibited.
 GRID
Remove of the VT’s,
VT’s disconn
ecting
To mark and disconnect the electrical supply of the VT terminal
(E)
.
Disconnect the VT’s braides :
(according to the user configuration)
D
without fuse disconnect the braides from the case
(E1)
.
D
with
fuse disc
onnec
t the braide
from the fuse
(E2)
.
x1
.
E2
x1
H
M10-
-16
.
E1
H
M10-
-16
HM8--12
M6--12
x1
x5
Secondary
terminals
Primary
terminal
.
E
H1
H2
.
E2
.
E1
Continued on next page.