Product Overview GEM80-400
Page xxxii ALSPA GEM80-400 SERIES CONTROLLERS TECHNICAL MANUAL Issue 3 04/99
The executive code or "Firmware" that provides the GEM
80-400 Processor
Module with its characteristic functionality is stored in FLASH EPROM and may be
updated by the user on site using a user friendly, DOS based, PC compatible,
firmware update utility. (See Chapter 9 - Maintenance and Fault Finding.)
This firmware update utility communicates with the GEM
80-400 front panel
programming port in the same way as a PC based GEM80 programming tool
and will normally be able to use the same serial link connection lead.
To Next Page
Loading...