Alstom iSTAT M232 - Page 41

M2x2/EN M/F User Manual
iSTAT M2x2 Page 39
Figure 12-12 in the Installation Wizard section describes the language selection. Once
sele
cted, the language option appears in the lower menu when the cursor highlights the
language option.
Figure 13-3 illustrates the Temperature Unit setting. The user can select either Centigrade or
Fahrenheit as the unit of measure.. Press the OK key to return back to the General Menu.
Temperature Unit
Figure 13-3
Menu name
 °C
 °F
Temperature Unit display
OK Select
Back to General menu
Figure 13-4 illustrates the MD time constant setting. The user can select a time constant
setting from 1 to 255 minutes. Pressing the DOWNor UP keys scrolls through the
options. Press the OK key to return back to the General Menu.
MD Time constant
Figure 13-4
Menu name
_15 min.
MD time constant display
OK Select
Back to General menu
Figure 13-5 illustrates the Average Interval setting. The user can select from 6 different
settings, from 8 periods to 256 periods. Pressing the DOWNor UP keys scrolls through
the options. Press the OK key to return back to the General Menu.
Average Interval
Figure 13-5
Menu name
 8 periods
 16 periods
 32 periods
 64 periods
 128 periods
 256 periods
Average Interval display
OK Select
Back to General menu