Alstom iSTAT M232 - LCD Navigation

User Manual M2x2/EN M/F
iSTAT M2x2 Page 40
12.3
LCD Navigation
Figure 13-6 illustrates the LCD menu structure. The user can browse through the available
settings using the direction keys, by pressing the DOWNor UP keys and then pressing
the OK key to make a selection. The LEFT key is pressed to return to the Settings Menu.
LCD
Figure 13-6
Menu name
Contrast
Back Light
Back Light time off
Demo cycling period
Custom screen 1
Custom screen 2
Custom screen 3
LCD display
-3
Back to Settings menu
Contrast: this is adjusted using the DOWNor UP keys until the desired contrast has
been reached, the scale is from -10 to +10 with -3 being the normal value. Pressing the OK
key confirms the selection. The numeric value is shown in the lower menu when the Contrast
setting is selected.
Back Light: this is adjusted using the DOWNor UP keys until the desired lighting has
been reached, the scale is from 0 to +10. Pressing the OK key confirms the selection. The
numeric value is shown in the lower menu when the Back Light setting is selected.
Back Light time off: this is adjusted using the DOWNor UP keys until the desired time
off setting has been reached. The setting is from 0 to 60 minutes. Pressing the OK key
confirms the selection. The numeric value is shown in the lower menu when the Back Light
time off setting is selected.
Demo cycling period: this is adjusted using the DOWNor UP keys until the desired time
period has been reached. The setting is from 1 to 60 seconds. Pressing the OK key confirms
the selection. The numeric value is shown in the lower menu when the Demo Cycling period
setting is selected.
Figure 13-7 illustrates the Custom screen menu structure. The user can browse customise 3
screens to show important information. The desired measurement is selected using the
DOWNor UP keys and then pressing the OK key to confirm. The RIGHT or LEFT
keys are used to move the cursor to the next measurement. Pressing the OK key confirms
the selection and returns to the LCD Menu.
LCD
Figure 13-7
Menu name
U1
U2 U3
LCD display
OK Select
Back to LCD menu