V00412
tclp Time Delay
01500
tcold Time Delay
01500
I>1 Status
Enabled
I>1 Current Set
0.20
SET For Save
RESET For Cancel
OK
I>1 TMS
0.100
COLD LOAD PICKUP
GROUP 1
I>1 Current Set
0.20
I>1 Time Delay
0.100
NOTE:
If the Curve Selection in Over
Current IEC or IEEE, then Flow
Chart will be as follows.
NOTE:
If the Curve Selection in Over
Current is DT i.e. Definite
Time, then Flow Chart will be
as follows.
Note: Flow chart for COLD LOAD PICKUP for I>2, I>3, IN>1, IN>2 and IN>3 is same as above.
To Next Page
Loading...
