Alstom MiCOM P50 Agile P15D - Page 54

5 Configuration
P50 Agile P15D
5-18
P15D/EN TM/B
DST End mins
0060 Mins
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired DST End minutes can be set. The setting range is from
0000 to 1425 in steps of 15.
After editing the desired DST End minutes press the Edit Key, the
number will stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option.*
RP Time Zone
Local
Press the Edit, Key the text will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired RP Time Zone can set i.e. Local / UTC
After selecting the desired RP Time Zone press the Edit Key, the text will
stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option.*
SET Hours
16
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired SET Hours can be set. The setting range is from 00 to
23 in steps of 1.
After editing the desired SET Hrs press the Edit Key, the number will
stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option.*
SET Minutes
27
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired SET Minutes can be set. The setting range is from 00
to 59 in steps of 1.
After editing the desired SET Minutes press the Edit Key, the number will
stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *
SET Seconds
08
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired SET Seconds can be set. The setting range is from 00
to 59 in steps of 1.
After editing the desired SET Seconds press the Edit Key, the number
will stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *
SET Date
16
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired SET Date can be set. The setting range is from 1 to 31
in steps of 1.
After editing the desired SET Date press the Edit Key, the number will
stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *