Note:
* The User can scroll the previous settings by using the Plus / Up arrow key (+ /
).
** After Editing any sub menus of the CONFIGURATION setting, If the SET/ Left (
) arrow key is pressed,
the Relay ask SET to SAVE the changes or RESET to CANCEL the changes.
2.3.6.2 View settings
CONFIGURATION
Press the Minus / Right arrow key (- /) to view the Configuration
setting
Restore Defaults
No Operation
This window shows the Restore Defaults setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
Active Setting
Group 1
This window shows the Active setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
Setting Group 1
Enabled
This window shows the Setting Group 1 setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
Setting Group 2
Enabled
This window shows the Setting Group 2 setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
System Config
Enabled
This window shows the System Configuration setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
Overcurrent
Enabled
This window shows the Over Current setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
To Next Page
Loading...
