Note:
* The User can scroll the previous settings by using the Plus / Up arrow key (+ /
).
** After editing any sub menus of the CT AND VT RATIOS setting, If the SET/ Left (
) arrow key is pressed,
the Relay ask SET to SAVE the changes or RESET to CANCEL the changes.
2.3.7.2 View settings
CT AND VT RATIOS
Press the Right arrow key (- /) to view the CT AND VT RATIOS
settings.
Phase CT Primary
00100 A
This window shows the Phase CT Primary setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
Phase CT Sec”y
00001 A
This window shows the Phase CT Secondary setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
E/F CT Primary
00100 A
This window shows the E/F CT Primary setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
E/F CT Secondary
00001 A
This window shows the E/F CT Secondary setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
Phase CT Primary
00100 A
The window displays the first setting of the CT & VT RATIOS.
Press the Left arrow key () or Right arrow key () to return to the
Main Menu.
To Next Page
Loading...
