Alstom MiCOM P54 Series - Page 581

Programmable Logic P54x/EN PL/La4
MiCOM P543, P544, P545 & P546 (PL) 7-47
PL
DDB no. English text Source Description
1464 CB1 CS2 SlipF>
Line-Bus 1 slip freq > SlipFr 1-2 setting
(frequency difference (slip) between line
voltage and bus 1 voltage is greater than
maximum slip permitted for CB1 synchronism
check type 2)
P544 and P546 only
1465 CB1 CS2 SlipF<
Line-Bus 1 slip freq < SlipFr 1-2 setting
(frequency difference (slip) between line
voltage and bus 1 voltage is within the
permitted range for CB1 synchronism check
type 2)
P544 and P546 only
1466 CB2 CS1 SlipF>
Line-Bus 2 slip freq > SlipFr 2-1 setting
(frequency difference (slip) between line
voltage and bus 2 voltage is greater than
maximum slip permitted for CB2 synchronism
check type 1)
P544 and P546 only
1467 CB2 CS1 SlipF<
Line-Bus 2 slip freq < SlipFr 2-1 setting
(frequency difference (slip) between line
voltage and bus 2 voltage is within the
permitted range for CB2 synchronism check
type 1)
P544 and P546 only
1468 CB2 CS2 SlipF>
Line-Bus 2 slip freq > SlipFr 2-2 setting
(frequency difference (slip) between line
voltage and bus 2 voltage is greater than
maximum slip permitted for CB2 synchronism
check type 2)
P544 and P546 only
1469 CB2 CS2 SlipF<
Line-Bus 2 slip freq < SlipFr 2-2 setting
(frequency difference (slip) between line
voltage and bus 2 voltage is within the
permitted range for CB2 synchronism check
type 2)
P544 and P546 only
1470 CB2 CS1 VL>VB
Voltage magnitude difference between Line V
and Bus2 V is greater than setting "VDiff2-1"
(line V > Bus V)
P544 and P546 only
1471 CB2 CS2 VL>VB
Voltage magnitude difference between Line V
and Bus2 V is greater than setting "VDiff2-1"
(line V > Bus V)
P544 and P546 only
1472 CB2 CS1 VL<VB
Voltage magnitude difference between Line V
and Bus2 V is greater than setting "VDiff2-1"
(line V < Bus V)
P544 and P546 only
1473 CB2 CS2 VL<VB
Voltage magnitude difference between Line V
and Bus2 V is greater than setting "VDiff2-1"
(line V < Bus V)
P544 and P546 only
1474 CB2 CS1 FL>FB
Frequency difference between Line V and
Bus2 V is greater than setting "SlipFr2-1" (line
freq > Bus freq)
P544 and P546 only
1475 CB2 CS2 FL>FB
Frequency difference between Line V and
Bus2 V is greater than setting "SlipFr2-2" (line
freq > Bus freq)+D2253