Alstom MiCOM P546 - Page 41

Technical Data P54x/EN TD/La4
MiCOM P543, P544, P545 & P546
(TD) 2-11
Settings, measurements and
records list
Settings list
Global settings (system data):
Language: English/French/German/Spanish
English/French/German/Russian
Chinese/English/French
Frequency: 50/60 Hz
Circuit breaker control (CB control):
TD
CB Control by:
Disabled
Local
Remote
Local+remote
Opto
Opto+local
Opto+remote
Opto+rem+local
P543 and P545 specific CB control settings
:
Close pulse time: 0.10…10.00 s
Trip pulse time: 0.10…5.00 s
Man close t max: 0.01…9999.00 s
Man close delay: 0.01…600.00 s
CB healthy time: 0.01…9999.00 s
Check sync time: 0.01…9999.00 s
Reset lockout by: User interface/CB close
Man close RstDly: 0.10…600.00 s
Single pole A/R: Disabled/Enabled
Three pole A/R: Disabled/Enabled
CB Status Input:
None
52A 3 pole
52B 3 pole
52A & 52B 3 pole
52A 1 pole
52B 1 pole
52A & 52B 1 pole
P544 and P546 specific CB control settings:
Man Close Delay: 0.01…600 s
CB Healthy Time: 0.01…9999 s
Check Sync. Time: 0.01…9999 s
Rst CB mon LO By: User Interface,
CB Close
CB mon LO RstDly: 0.1…600 s
CB1 Status Input: None, 52A 3 pole,
52B 3 pole,
52A & 52B 3 pole,
52A 1 pole,
52B 1 pole,
52A & 52B 1 pole
CB Status Time 0.1 ... 5 s
CB2 Status Input: None, 52A 3 pole,
52B 3 pole,
52A & 52B 3 pole,
52A 1 pole,
52B 1 pole,
52A & 52B 1 pole
Res AROK by UI: Enabled/Disabled
Res AROK by NoAR: Enabled/Disabled
Res AROK by Ext: Enabled/Disabled
Res AROK by TDly: Enabled/Disabled
Res AROK by TDly: 1.0…9999 s
Res LO by CB IS: Enabled/Disabled
Res LO by UI: Enabled/Disabled
Res LO by NoAR: Enabled/Disabled
Res LO by ExtDDB: Enabled/Disabled
Res LO by TDelay: Enabled/Disabled
LO Reset Time: 1…9999 s
Date and time
IRIG-B Sync: Disabled/Enabled
Battery Alarm: Disabled/Enabled
LocalTime Enable: Disabled/Fixed/Flexible
LocalTime Offset: -720...720
DST Enable: Disabled or Enabled
DST Offset: 30...60
DST Start: First, Second, Third, Fourth, Last
DST Start Day: Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday
DST Start Month: January, February, March,
April, May, June, July, August, September,
October, November, December
DST Start Mins: 0...1425
DST End: First, Second, Third, Fourth, Last
DST End Day: Monday, Tuesday,
Wednesday, Thursday,
Friday, Saturday
DST End Month: January, February, March,
April, May, June, July,
August, September,
October, November,
December
DST End Mins: 0...1425
RP1 Time Zone: UTC or Local
RP2 Time Zone: UTC or Local
DNPOE Time Zone: UTC or Local
Tunnel Time Zone: UTC or Local
Configuration
Setting Group:
Select via Menu
Select via Opto
Active Settings: Group 1/2/3/4
Setting Group 1: Disabled/Enabled
Setting Group 2: Disabled/Enabled
Setting Group 3: Disabled/Enabled
Setting Group 4: Disabled/Enabled
Distance: Disabled/Enabled
Directional E/F: Disabled/Enabled