Memory usage: indicates the memory usage related to the fault, disturbance, TW, steady-state and
SOE records and log;
Last power-up: indicates the date and time since the last power up.
B The <REFRESH> button allows user to refresh the screen information.
C The <CLOSE> button allows user to close the section.
3.3.2 LINKS STATUS
The Links screen, shown in Figure 56, displays the equipment links status.
Figure 56: Link status screen
A Indicates the date the equipment status was last updated in the yyyy-mm-dd hh:mm:ss + 0000 format
where o is UTC time offset.
B Link status, with the following information:
Position: indicates the link position of A to L;
Module: indicates the module type related to the link position;
Status: indicates the status of the link. Active if it is sending and receiving data and inactive if it is
not.
C The <REFRESH> button allows user to refresh the screen information.
D The <CLOSE> button allows user to close the section.
To Next Page
Loading...