2.3 CONFIGURATION TOOL
2.3.1 DESCRIPTION
The Configuration Tool allows creation of offline equipment configuration and sending of it to several RPV's.
With this tool it is possible to make a safety backup of all the equipment configurations and either export
them to a file server or keep them locally on the user's PC.
The user interface is based on the Web Interface used to access the equipment. A Web browser is required
to run this tool.
An Ethernet or a modem interface makes access for sending or receiving configuration to from the
equipment. Once it is received, the equipment configuration is stored locally and may be edited or renamed
without requiring any other access to such equipment.
To send a configuration it is mandatory that the connection to equipment be available. The same
configuration may be sent to different pieces of equipment.
The user must beware that all configuration parameters are immediately effective once the configuration has
been transmitted. Wrong configuration parameters may set the equipment to Not Ready or cause loss of
communication.
By clicking the Configuration Tool icon, the PC's default Web browser will open the tool. The main screen is
shown in Figure 78.
Figure 78: Configuration Tool main screen
To Next Page
Loading...