2.3.6 IMPORTING EQUIPMENT CONFIGURATION
It is possible to import a configuration previous saved on the computer. To import a configuration, the
exported configuration XML file has to be first stored in the folder C:\RPV\conftool\conf and then proceed as
follows:
Double click Conftool icon. The Configuration Tool interface will open in the default Web browser;
Click on the IMPORT button. A new window will open;
Click on the Browse button to choose the configuration file previously saved on the computer;
Enter a name for the configuration;
Click on the OK button. An RPV configuration interface will open. It is possible to check the configuration
parameters as if user were on-line with the equipment;
Click on the SAVE button once again to save the new configuration on the PC;
Click on the FINISH button to go back to the main screen of the Configuration Tool.
The configuration will be on the list of locally stored configurations.
The configuration window will appear in the Configuration Tool. The user can choose to edit the configuration
again, store it or transmit it to the RPV.
It is possible to save the configuration with the same name as an existing one. However, the existing
configuration will be overwritten.
2.3.7 EDITING A STORED CONFIGURATION
To edit a stored configuration follow these steps.
Select the name of the stored configuration to be edited and click on the EDIT button;
Change the configuration parameters and click on the SAVE button;
A new window will open requiring the name of the configuration (maximum of 22 characters including , -, 0-
9, a-z and A-Z);
Click on the SAVE button once again to save it on the PC;
Click on the FINISH button to go back to the main screen of the Configuration Tool.
2.3.8 DELETING A LOCALLY STORED CONFIGURATION
To remove a configuration that is locally stored, follow these steps:
Select the name of the stored configuration to be deleted and click on the REMOVE button;
The message Remove this item will be shown. Click on the YES button to remove the configuration.
2.3.9 CREATING A CONFIGURATION REPORT
To create the configuration report, follow these steps:
To Next Page
Loading...