3 SOFTWARE DESCRIPTION
3.1 RPV MANAGER MAIN WINDOW
3.1.1 SYSTEM MONITOR
Figure 85 - RPV Manager main window
The software main tab is called System Monitor. All the substation and RPV311 configured in the software
are listed in a tree menu on the left corner of the window.
The top level of the tree shows the user created facilities and the equipment installation on the second level.
After clicking on the device with the left mouse button, the equipment records will be loaded and displayed in
tabs depending on the type of record selected (Fault, Disturbance, Traveling Wave, Steady-State or
Sequence of Events). This information is updated after a Refresh.
By right-clicking on the equipment, the user can update the State of the equipment, through the option
"Refresh", or access the equipment web configuration page, through the option "Access Web Configuration".
Figure 86: Records download
To Next Page
Loading...