The RPV Manager sorts the devices in the follow manner:
First, it is necessary to create what is called Installation, that can ben, for example, the substation where de
RPV is installed. Then the user has to register the RPV and assign each of them to an installation by creating
what is called Device.
Undermentioned is the procedure to create Installations and Devices.
Creating Installations
The process to create a new Installation is:
1. Click <SETTINGS> menu and then click <INSTALLATIONS>;
2. Click <NEW> to create. Type the Installation's name and description and then press <OK>.
The user can view the list of registered substations and add, edit, or remove a substation. Substations can
only be removed without any equipment being associated.
Creating Devices
The user can view the list of registered equipment, add, edit, or remove some equipment. Equipment can
only be removed when there is no transmission line associated and if the Auto Polling is disabled. bellow
The process to create a new device is:
Click <SETTINGS> menu and then click <DEVICES>;
Click <NEW> to create.
At <HOST>, type equipment's IP address;
Choose device installation in the Installation list;
Click at <Get Info> and then press <Ok>.
Generally, User name and Password are not required to download DFR registers. If required for the
application, then type Users name and password for administrator user of the equipment (Alstom's default,
user name is admin and password is 1234). The figure below shows the Device configuration window.
To Next Page
Loading...