Chapter 4 – Configuration
Figure 15: Analog inputs configuration section for Sampled Values channels
A The POSITION indicates the position of each analog input according to the Sampled Value message.
B The INPUT scroll box allows user to select the type of the signal to be received as Sampled Values.
C The ADJUSTMENT text field allows user to enter a correction factor to adjust the accuracy of the
measurement.
3.6 ACCESS CONTROL
The equipment has independent access control to:
Check the equipment status, monitor the measured values, access the records and the equipment's
configuration;
Firmware Upgrade;
Maintenance;
Modem connection.
In the section shown in Figure 16, it is possible to determine whether the password will be required for every
access and it also allows user to exchange the update firmware password and the download password.
To Next Page
Loading...