Chapter 4 – Configuration
Figure 16: Equipment access control configuration section
A The USE PASSWORD FOR ALL ACCESS LEVELS check box enables use of password to access equipment
operation and configuration via Web Interface.
B The FIRMWARE UPDATE PASSWORD text field allows user to enter an independent password to update the
firmware for the equipment. The factory-set default password is 12345. This field cannot be disabled.
C The DOWNLOAD PASSWORD text field allows user to enter an independent password to access the
automatic file records scanning. The factory-set default password is 12345. This field cannot be disabled.
D The GOOSE CONFIGURATION PASSWORD text field allows user to enter an independent password to
configure the GOOSE application. The factory-set default password is 12345. This field cannot be disabled.
3.7 USER
It is possible to either add a new user or configure the administrator user.
In the Add a new user section, shown in Figure 17, it is possible to add users with different access levels.
To Next Page
Loading...