22
Getting started
Measurement without statistical evaluation.
Multiple measurement with statistics.
Continuous measuring with adjustable interval.
Measuring without statistics, saving and difference.
Reactivates all menues and functions when Basic
mode was activated.
Memory functions:
Turn saving on/off.
Select memory area from list.
Enter up to 50 memory areas.
Delete memory content or memory name.
Recall of memory content (use scroll wheel).
Settings for difference mode:
Turn difference measurement on/off.
Measure a standard.
Select standard (if saved).
Enter up to 50 standards and limits for Pass/Fail.
Delete individual standards.
Enter/change limit values for Pass/Fail.
The following can be used together simultaneously:
Mode
Sample mode
Statistics
Continous
Basic mode
Advanced mode
Geometry/Sensor
Memory
Memory
Select memory
Create memory
Delete memory
Display memory
Difference
Difference
Measure standard
Select standard
Create standard
Delete standard
Changestandard
Calibration
Setup
Calibrate, change cal. values, GU - % scale.
Bluetooth®, Date/Time, Beeper, Display time, Language,
Info
5.4 Overview of main menu
Select geometry and thickness sensor if applicable.
• Memory with: Sample mode, Statistics, Continuous
• Difference with: Sample mode, Statistics
To Next Page
Loading...
