Altana BYK spectro2guide Series - 2.3 Names and Functions of Parts

2 | System Description BYK-Gardner GmbH
14 spectro2guide Family 295 024 855 E 2405
2.3 Names and Functions of Parts
2.3.1 Frontside
1
2
3
1 LED:
Measure:
• Lights up in green during measurement.
• Lights up in blue if the sample is fluorescent, see “Fluorescence Measurement
[}36]”.
• Lights up in pink if color change due to fluorescence is bigger than 1/3 of the toler-
ance value. This is the default value, it can be changed in the software “smart-
chart”.
• Blinks red in case of a measurement error.
NOTICE
The indication of fluorescence is not available for the spectro2go.
Charge:
• Pulsates in red, yellow, and green during charging.
• Lights up in green when the instrument is fully charged.
2 Touch screen display:
• Touch the icons on the screen with your finger or the stylus in order to operate the
instrument.
3 Protective cap:
• Remove before putting into docking station or performing measurements.
• Attach when instrument is not used or placed in the transportation case.