Altana BYK spectro2guide Series - 3.5 Setting Measurement Parameter

BYK-Gardner GmbH Getting Started | 3
295 024 855 E 2405 spectro2guide Family 23
3 Quick Check
Perform quick evaluations without sav-
ing. Details see Perform Quick Check
[}32].
4 Browse
View and delete measurement data.
Details see Browse Measurements
[}42].
5 Configuration
Change measurement parameter or instrument settings and calibrate instrument. De-
tails see System Configuration [}46].
Additional Icons
Two more icons can be displayed - depending on whether you have activated Opacity or
downloaded an Organizer from “smart-chart”.
Opacity
Activate under Configuration > Measurement Parameters > Color Indices.
Details see Opacity Measurement [}34].
Organizer
Download at least one organizer from “smart-chart”. Details see Organizer
Measurement [}40].
3.5 Setting Measurement Parameter
The instrument is working with default measurement parameters. Before starting with measure-
ments these parameters may have to be controlled. Go to Configuration > Measurement pa-
rameter.
Color system
Select color system. Default is CIE L*a*b*.
Details see Color System [}47].
Illumination
Select standard illuminant.
Default is D65.
Color equation
Select color equation. Default is ΔE*. Details
see Color Equation [}48].
Observer
Select standard observer.
Default is 10°.
Color indices
Select color indices. Default is none. Details
see Color Indices [}50].
Statistics
No. of readings to be taken per standard or
per sample. Statistics are evaluated, if n > 1.
Details see Statistics [}52].