4 | Perform Measurements BYK-Gardner GmbH
26 spectro2guide Family 295 024 855 E 2405
Finally, the context menu provides following commands:
• Rename Sample
• Rename Testserie
• Delete last measurement
• Delete sample
• Delete test series
• End test series
• Geometry
4.1 Difference Measurement
Using this function you can compare standard and sample(s). You can load existing standards,
search for the closest standard or measure new standards. Click on icon Difference.
4.1.1 Loading existing Standard
In case standards are already stored in the instrument, the list with existing standards appears.
To Next Page
Loading...
