4 | Perform Measurements BYK-Gardner GmbH
30 spectro2guide Family 295 024 855 E 2405
To change the filter criteria, select the filter icon again. To remove the filter, select the cancel fil-
ter icon.
4.1.2 Search for closest Standard
Using this function you can measure any sample - the system will automatically present the
standard(s) in the instrument, which are closest to the current sample. Click on icon Difference.
The list with existing standards is displayed.
Click on item Autostandard. The measurement screen is displayed.
NOTICE
The option Autostandard only appears when at least one standard is stored in the instrument.
Measure your current sample just one time to search for closest standard.
To Next Page
Loading...
