4 | Perform Measurements BYK-Gardner GmbH
32 spectro2guide Family 295 024 855 E 2405
Accept the default name or enter a desired name and click on the checkmark in the upper right
corner. The instrument is ready to measure the standard.
Place instrument on standard.
Click on Measure or press the Operate button.
Standard is measured and automatically saved.
NOTICE
New standards can also be downloaded from “smart-chart” into the instrument.
4.2 Perform Quick Check
Using this function, you can compare a standard with one or more samples without saving for a
quick evaluation. Click on icon Quick check. The instrument is ready to measure the standard
for the quick check.
To Next Page
Loading...
