BYK-Gardner GmbH System Configuration | 6
295 024 855 E 2405 spectro2guide Family 49
6.1.3 Measurement Screen
Go to Measurement parameter > Color equation and scroll down to Measurement
screen. Select the data to be displayed in the measurement results.
Following data can be selected:
• STD = Standard
• SMP = Sample,
• ∆ = Difference (Delta) between Standard and Sample.
These data are visible in the measurements results.
The default setting is SMP, ∆SMP. In the example shown above the value for STD is displayed
too.
To Next Page
Loading...
