BYK-Gardner GmbH System Configuration | 6
295 024 855 E 2405 spectro2guide Family 51
6.1.5 Geometry
If your instrument is a sphere instrument (see Geometry d:8° [}18]) you can configure the mea-
surement condition:
• Specular included (Spin) or
• Specular excluded (Spex).
Go to Measurement parameter > Geometry and select the mode to be used during mea-
surement.
The mode is visible in the measurement screen when using the context menu which is accessed
via the hamburger menu icon.
If you select the option Spin/Spex in Measurement parameter, the context menu offers a
control to toggle between the two modes.
To Next Page
Loading...
