Altana BYK spectro2guide Series - 6.3.2 Auto Diagnosis and Calibration

6 | System Configuration BYK-Gardner GmbH
60 spectro2guide Family 295 024 855 E 2405
6.3.2 Auto Diagnosis and Calibration
The auto diagnosis takes place in the docking station. The white test standard in the docking
station is used to check color and gloss. In the given interval the auto diagnosis is requested.
If auto diagnosis in the docking station passes, you can use the instruments to measure.
If auto diagnosis fails, following message appears: “Please clean white test standard of docking
station or calibrate on external white calibration standard.”