BYK-Gardner GmbH System Configuration | 6
295 024 855 E 2405 spectro2guide Family 65
If the differences are within your tolerances you can continue to measure with your instrument.
Otherwise calibrate your instrument on the white standard.
NOTICE
Every difference measurement is stored in the instrument. Transfer the measurement data to
“smart-chart” to document each test case.
6.3.6 Pro Variant
For spectro2guide pro special standards for jetness test and calibration are provided, see “Ex-
clusive Parts for Pro Variant [}17]”.
NOTICE
Always use the LED flashlight included in delivery to check the cleanliness of your black test and
gray calibration standard – see “Cleaning the Jetness Standards [}83]”.
To Next Page
Loading...
