BYK-Gardner GmbH System Configuration | 6
295 024 855 E 2405 spectro2guide Family 73
To delete the item from the system memory use the function “Browse Measurements [}42]” >
“Delete Standard [}43]”.
NOTICE
The option Add to standard list will be inactive next time when the gray calibration standard
has already been added to the system memory.
6.3.6.4 Jetness Test Standard
To document the correct measurement status of your instrument you can save the black test
standard in the system memory. In the section Jetness test standard select the option Add
standard to list.
The black jetness test standard will be added to the list of standards in the system memory.
To Next Page
Loading...
