BYK-Gardner GmbH wave scan 3 / wave scan 3 dual
301 200 083 - 2309 9
5 Quick Check
Take readings without saving for a quick evaluation.
1 Name
Name of current sample.
2 Statistics
Readings taken compared to no. of
defined readings.
4 Context Menu
Allows to delete, rename, interrupt
…
3 Orientation
Allows to switch from vertical to ho-
rizontal or vice versa.
1. Place instrument on first sample to be measured.
2. Perform a reading:
– Press and hold the Operate button to initialize.
– Move evenly and slowly across the sample.
3. During reading a colored bar indicates the measuring progress.
4. The results of the data evaluation are displayed.
5. Change orientation Vert | Hor if required.
6. When no. of readings per sample is reached, proceed with next sample.
7. To end Quick check mode, select End test series from the context menu.
To Next Page
Loading...
