Need help?Do you have a question about the Altec Lansing N500F CROSSOVER NETWORK and is the answer not in the manual?
General| Brand | Altec Lansing |
|---|---|
| Model | N500F CROSSOVER NETWORK |
| Category | Crossover |
| Language | English |
Diagram A illustrates the connection for a 16 ohm source with 16 ohm LF and 16 ohm HF speakers.
Diagram B shows connections for an 8 ohm source with 8 or 4 ohm LF and HF speakers in parallel.
Diagram C details connections for a 4 ohm source, 16 ohm LF, and 8 or 4 ohm HF speakers.
Diagram D covers connections for an 8 or 4 ohm source with 16 ohm LF and 16 ohm HF speakers.
Diagram E illustrates connections for a 16 ohm source with 8 or 4 ohm LF/HF speakers in parallel.
Diagram F shows connections for a 16 ohm source, 16 ohm LF, and 4 or 8 ohm HF speakers.
Diagram G shows connection for HF horn and driver only, matching LF output with a 16 ohm resistor.
Diagram H illustrates proper phasing for the Low Frequency (LF) and High Frequency (HF) drivers.
