7.13.1The maximum length of timer is 24 hours and the minimum resolving power is 15
minutes.
7.13.2Timer on: first turn off the A/C, the A/C will be automatically on at the set time.
7.13.3Timer off: first turn on the A/C, the A/C will be automatically off at the set time
7.13.4Timer on/off function( on time is earlier than off time): first turn off the A/C, it will be
automatically on at set time, and later be off at the set time, then unit turns on at set time.
7.13.5Timer off/on function( off time is earlier than on time): first turn on the A/C, it will be
automatically off at set time, and later be on at the set time, then unit turns off at set time.
7.14Sleep mode
7.14.1It is available at cooling, heating or auto mode.
7.14.2 Cooling:
The set temperature rise 1 per hour. Two hours later, the set temperature will
maintain as a constant and the fan speed is kept at low speed.
7.14.3 Heating:
The set temperature decrease 1 per hour. Two hours later, the set temperature
will maintain as a constant and the air circulation is kept at low speed (Cold air proof
function takes precedence over all).
7.14.4 Auto:
The Sleep Mode running function operates in accordance with selected running mode by
auto mode.
7.14.5 After 7 hours, unit cancels this mode automatically.
7.15 Auto restart function
In case of a sudden power failure, this function automatically sets the unit to previous
settings before the power failure when power returns.
7.16 Mode conflict
The indoor units cannot work cooling mode and heating at same time.
Heating mode has a priority.
7.16.1Definition
Cooling mode Heating Mode Fan Off
Cooling mode No Yes No No
Heating Mode Yes No Yes No
Fan No Yes No No
Off No No No No
No: No mode conflict;
Yes: Mode conflict
7.16.2 Unit action
• In case of one Indoor unit working in cooling mode or fan mode, and another indoor unit
is set to heating mode, the indoor unit working in cooling mode or fan mode will change
to stand by. The outdoor unit will work in heating mode.
• In case of one Indoor unit working in heating mode, and another indoor unit is set to
cooling mode or fan mode, the indoor unit setting to cooling mode or fan mode will
change to stand by.
To Next Page
Loading...
