Page 12 of 22
BOUQUET SELECTION POP-UP
NOTE: The Bouquet Options pop-up is only available when there are bouquets in the play-out. When no bouquet
play-out’s are detected, the TV button is disabled in the viewing environment.
The Bouquet Selection Pop-up allows you to select the channels from a particular bouquet.
This pop-up allows you to toggle between the different bouquets.
Within each Bouquet, there are TV Services and Audio Services. The decoder’s default is always tuned to a TV
service from that bouquet and not to a radio service.
You can tune to the Audio Services of that Bouquet by using the “Shift-AUDIO” button on the RCU. To return to
the TV Services press the “TV” button.
If you go to a Bouquet that contains no Audio Services, an error banner will appear, stating, “Reserved for
future use” on an error banner.
If a Bouquet does contain Audio Services, the Audio Service will default to the first channel of the currently selected
Bouquet.
Once you have selected the Bouquet, the channels that are allocated to that Bouquet are:
The only channels available when “P+” or “P-” is used to select another channel from the currently viewed
service.
The only channels appearing on the i-Plate when activated, and the “LEFT/RIGHT” arrow buttons are used to
browse the programme information on the other channels.
The only channels appearing in the TV Guide Grid screen, when “TV GUIDE” button is pressed.
Decoder Features and Menu
To Next Page
Loading...
General