4. Close the door once the fire is burning well.
Let the stove burn out and cool down.
Repeat this ten times. Between two burning procedures, remove any excess
ash from the hearth..
When the first fire procedure is complete you can use the NOBLÈS
completely. For stoves from the NOBLÈS series, Altech recommends
the so-called Top-Down heating instructions. With this method of
lighting up, the stove and the chimney quickly reach the right
temperature. This creates a better and cleaner combustion. Also
the stove burns much longer on the first fill of wood.
1. Open the air supply completely.
2. Remove any dedundant ash.
Ash has an insulating function, resulting
in an faster optimum temperature in the
combustion chamber. Preferably do not
completely remove the ash.
3. Place 1 lager log on the bottom. Do
this with the bark pointing down. Never
use too large blocks of wood. Thick
blocks of wood have a smaller surface
area with respect to their weight so that
they can burn not properly. Logs with
“fist thickness”have the maximum size.
To Next Page
Loading...
Need help?
General