AltiTouch 500 Manual 2
1. LCD display
2. Hook switch
3. Telephone keypad
4. Volume - to adjust receiver volume for handset, speaker, and headset
5. Message light - visual message waiting indicator
6. button - to adjust LCD contrast
7. In Use - line in use indicator
8. ! - to review upward from the oldest caller ID record
9. "- to move cursor left during programming
10. #- to review downward from the newest caller ID record
11. $- to move cursor right during programming
12. Dial/Enter button - to dial number displayed or to accept entry
13. Directory button - to begin using directory features
14. Flash button - during a call, to access calling features
15. Hold with indicator -toputacallonhold,LEDisonwhenactive
16. button - to connect or to disconnect voice path to headset
17. Redial/Pause button
18. Mute with indicator - to mute transmitter, LED is on when active
19. Goodbye - to hang up a call at any time
20. Speaker - to activate or to deactivate speakerphone
21. Menu button - to set telephone operation parameters
22. Save - to begin programming of memory buttons or directory
23. Delete - to delete one or all records in caller ID log or directory
24. M1- programmable memory button
25. M2 - programmable memory button
26. M3 - programmable memory button
27. M4 - programmable memory button
28. M5 - programmable memory button
29. M6 - programmable memory button
30. M7 - programmable memory button
To Next Page
Loading...