#823/32/36 INSTALLATION/OPERATION/SERVICE MANUAL • 4.
INSTALLATION
Stacking Instructions
No. 16222 or 16237 kit for
750-S
Using Stacking Platform from
kits 16222 or 16237
to provide carving shelf:
1. Remove the three screws in the top plate at the
front of the cabinet.
2. Remove the three screws in the back plate near the
top of the cabinet.
2. Position the stacking platform on top of the unit
with the flange in front, aligning the holes in the
platform over the holes in the cabinet.
3. Reinstall the cabinet screws removed in steps 1 and 2
through the platform holes to attach it to the cabinet,
front and back.
4. Place the carvery shelf on the stacking platform.
500-S or
stacking carving shelf
Step 1
Step 2
To Next Page
Loading...
