#8405 — QUICKCHILLER INSTALLATION, OPERATION, AND MAINTENANCE
Pg. 4.
I N S TA L L AT I O N R E Q U I R E M E N T S
T
he model QC-3 is a counter mounted unit and
must be sealed to the counter with a NSF listed
silicone sealant.
For all other
models, install
the appliance on a
smooth and level floor surface. Use the
adjustable cabinet legs to level the Quickchiller.
Adjust from front-to-back and from side-to-side
with the use of a spirit level to evenly
distribute the cabinet weight and avoid pulling
the cabinet alignment out of square.
After leveling the cabinet of cart equipped
models, check the height relationship of the roll-
in cart to the cabinet. Adjust the Quickchiller
height as needed to accommodate the cart and
to securely close the Quickchiller door(s).
D
O O R S E A L :
Check the door gasket to make certain it is sealing
properly and that the gasket provides an even and
positive seal around the entire door frame.
TO PREVENT PERSONAL INJURY,
USE CAUTION WHEN MOVING OR
LEVELING THIS APPLIANCE.
To Next Page
Loading...
Need help?
General
