Need help?Do you have a question about the Alto Aqua Leader Contempra and is the answer not in the manual?
General| Brand | Alto |
|---|---|
| Model | Aqua Leader Contempra |
| Category | Swimming Pool |
| Language | English |
Crucial safety precautions and rules for safe pool usage.
Diagram showing all pool components with labels for identification.
Detailed list of parts with part numbers and quantities for different pool sizes.
Visual guide to the buttress assembly components and their arrangement.
Detailed list of parts specific to the buttress assembly.
Identification and tool requirements for hardware used in pool assembly.
Guidelines for selecting a suitable, level, and well-drained site for the pool.
List of unsuitable locations and environmental factors to avoid for pool installation.
Considerations for future additions like decks and placement near utilities.
Lists of tools and materials required for ground preparation and installation.
Step-by-step guide to marking out and preparing the ground for the pool.
Instructions for clearing the area and compacting the soil for a stable base.
Method for ensuring the pool site is perfectly flat and level before installation.
Procedures for measuring and digging trenches for pool buttresses.
Detailed instructions on digging trenches for structural buttresses.
Steps for assembling buttresses and fitting them into base channels.
Visual summary of the buttress assembly components.
Step-by-step guide for assembling buttresses for straight pool sections.
Instructions for inserting buttress components into the base channels.
Guide on filling U-channels with limestone for stability.
Steps for attaching straps, brackets, and hold-down plates to the base.
Instructions for placing and securing hold-down plates for the pool wall.
Final steps for securing buttresses and hold-down plates.
Guide for installing curved bottom rails according to pool footprint.
Instructions for placing optional patio stones at the base of uprights.
Method for applying sand or styrofoam as a base for the liner.
Steps for uncoiling and positioning the pool wall into the base rails.
Instructions for securing and sealing the pool wall joints.
Creating a protective cove around the inside base of the pool wall.
Techniques for preparing the pool wall for liner installation using a vacuum.
Detailed steps for installing an overlap type pool liner.
Guide for installing bead or snap bead type pool liners.
Instructions for installing hung, J-bead, or V-bead type pool liners.
Steps for installing uprights on round pool sections.
Steps for installing uprights on straight pool sections.
Attaching brackets to uprights for round pool sections.
Attaching brackets to uprights for straight pool sections.
Securing stabilizers and attaching top plates to uprights.
Attaching top ledges to uprights for round pool sections.
Attaching top ledges to uprights for straight pool sections.
Attaching the top ledge for the skimmer opening.
Installing the outer upright component.
Attaching the decorative ledge covers.
Final steps for filling the pool with water and installing accessories.
Essential safety guidelines and necessary equipment for pool users.
Detailed diagram showing component placement and measurements for a 15x26 oval pool.
Detailed diagram showing component placement and measurements for an 18x33 oval pool.
Detailed diagram showing component placement and measurements for a 21x43 oval pool.
To Next Page