Television / User Manual
43 / 57 TR
DETAILED CHANNEL SETTINGS
----------------------------------------------------
Searching for all digital televi-
sion channels from a satellite
automatically
New satellite channels are added or satellite
data is changed frequently. Therefore, we rec-
ommend you to run auto search function from
time to time.
All transponders are scanned for new channels.
1 Open the »Input Source« menu with »
«.
2 Select »SATELLITE« using »
V
« or »
Λ
« and
confirm with »OK«.
3 Press »MENU« to open the menu.
4 Press »
<
« or »
>
« to select the »CHANNEL«
menu and press »OK« to confirm.
– »CHANNEL« menu is now enabled.
5 Select »Auto Tuning« with »
V
« or »
Λ
« and
confirm with »OK«.
– »Tuning Setup« menu will be displayed.
MENU ENTER
Tuning Setup
Back Start
Service Type All
Channel Type Free+Scramble
Scan Mode Default
Country Turkey
Satellite TURKSA...
6 In the »Tuning Setup« menu, select the coun-
try from »Country« using »
<
« or »
>
«.
7 Select the »Satellite« option using »
V
« or
»
Λ
« and select the satellite you want to
search with »
<
« or »
>
«.
8 Select »Channel Type« using »
V
« or »
Λ
«.
Press »
<
« or »
>
« to select whether you
want to search for only free digital television
channels (Free), only scrambled digital
television channels (Scramble) or the both
(Free+Scramble).
Note:
7
If some of the frequencies are not stored
completely due the changes in satellite
parameters made by the broadcaster, it is
recommended to set the »Network Settings«
option to »Network«.
9 Select »Service Type« using »
V
« or »
Λ
«.
Press »
<
« or »
>
« to select whether you want
to search for only television channels (DTV),
only radio (Radio) or the both (All).
10 Press »OK« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– Search may take several minutes depend-
ing on the number of television channels
received.
Note:
7
The search can be ended prematurely with
»MENU«.
11 Press »MENU« to end the setting.
To Next Page
Loading...