TruVue - Desk Stand
Attaching Uprights to Base
If using a Monitor with standard
width stand or using the Laptop
Tray, use the set of holes that
are closer together.
If using a Monitor with wider
stand (Like Microsoft Surface)
use the set of holes that are
farther apart.
Attach Left side Upright to plate
with (3) M4 x 10mm screws.
Attach Right side Upright to plate
with (3) M4 x 10mm screws.
Attach the Uprights with grooves facing in and
flat sides with screw holes at top facing forward.
To Next Page
Loading...