1
We reserve the right to any technical change.
Valid on 2022.03.16
PROGRAMMING MANUAL OF THE AC151-06 TRANSMITTER
1. TECHNICAL SPECIFICATIONS
Power supply:
Operating temperature:
AC151-06 - 6-channels:
3 V (1xCR2430)
~ -20°C - ~ +55°C
Average range: 80 meters (in open space), 20 meters (inside buildings)
Frequency: 433.92 MHz
Company reserves the tolerance of catalog data due the different conditions usage.
In accordance with the provisions of the Directive of the European Parliament and of the Council 2012/19 / EU of 4 July 2012
on waste electrical and electronic equipment (WEEE), it is prohibited to place of used equipment together with other wastes,
marked with crossed out wheeled bin symbol. The users are obliged to transfer their used equipment to a designated collection
point for proper processing. The marking means, at the same time, that the equipment was put on the market after 13 August
2005. These legal obligations have been introduced to reduce the amount of waste generated from waste electrical and
electronic equipment and to ensure an appropriate level of collection, recovery and recycling. The equipment does not contain
any dangerous components, which would have any particularly negative impact on the environment and human health.
Possible of control of 6 motors or 6 groups of motors.
2. DIAGRAM OF THE FRONT PANEL
Works with all AM series radio control motors as well as AC control units and switches offered by ALUPROF S.A.
LEFT
SET RIGHT
STOP DOWNUP P2 ON/OFF
OPERATING BATTERY ACTIVE
CHANNEL
CLOCK
ROLLER
WEEK DAYS
Radiated power: 10 miliwat (mW)
PROGRAMMING MANUAL OF THE AC151-06 TRANSMITTER
MODE
SHUTTER MOVE
STATUS
To Next Page
Need help?
General
