What to do if I forgot the password for my Alvarion Modem?
If you've forgotten your password, reset the Alvarion modem to its default configuration. Press and hold the reset button on the rear panel for at least 5 seconds. After the reset, use the default password 'Alvarion' to access the management interface.
How to fix Alvarion BreezeMAX Si 4000 CPE Modem if I cannot access the Internet?
If you cannot access the Internet, ensure your Windows system is correctly configured for TCP/IP, and that the IP settings are set to obtain an IP address automatically. Also, check with your WiMAX service provider for service coverage information. You may also want to check the System Status page of the web interface and contact your WiMAX service provider.
What to do if the management interface of my Alvarion BreezeMAX Si 4000 CPE cannot be accessed using a web browser?
If you cannot access the management interface, first ensure your management station is correctly configured for TCP/IP, with IP settings set to obtain an IP address automatically. Try using the Ping command from the management station to the unit’s IP address to verify that the entire network path between the two devices is functioning correctly. Also, check that the management station has a valid network connection and that the Ethernet port you are using has not been disabled. Finally, check the network cabling between the management station and the unit; if the problem persists, try a different port or cable.
Why is the Power LED off on my Alvarion BreezeMAX Si 4000 CPE Modem?
If the power LED is off, the AC power adapter may be disconnected. Please check the connections between the unit, the AC power adapter, and the wall outlet.
Why is the WiMAX LED off on my Alvarion BreezeMAX Si 4000 CPE Modem?
If the WiMAX LED is off, check with your WiMAX service provider for service coverage information.
What to do if the LAN link LED is off on my Alvarion BreezeMAX Si 4000 CPE Modem?
If the LAN link LED is off, verify that the unit and the attached device are powered on. Ensure the cable is securely plugged into both the unit and the corresponding device. Verify that the proper cable type is used and its length does not exceed specified limits. Check the cable connections for possible defects, and replace the cable if necessary.
General| Category | Modem |
|---|---|
| Model | BreezeMAX Si 4000 CPE |
| Modulation | OFDM |
| Interface | Ethernet |
| Ethernet Ports | 1 |
| Duplexing | TDD |
| Output Power | Up to 23 dBm |
| Antenna | Integrated |
| Operating Temperature | -30°C to +55°C |
| Power Supply | 12V DC |
| Management | Web-based |
Overview of the BreezeMAX Si 4000 as a residential gateway and WiMAX station.
Critical safety precautions for operating the BreezeMAX Si 4000 unit.
Detailed specifications including general, WiMAX, WiFi, and VoIP parameters.
Lists the necessary components and prerequisites for installing the BreezeMAX Si 4000.
Step-by-step guide on how to install the BreezeMAX Si 4000 unit and connect it.
Details the physical components and ports of the BreezeMAX Si 4000 unit.
Explains post-installation actions for ensuring connectivity and service provisioning.
Guide to configuring the CPE via web interface or application CD.
How to verify the proper operation of the unit after configuration.
Overview of the Setup menu for general management functions and system parameters.
Configuring core system parameters like operation mode, connection type, and WAN MTU.
Changing the default password and setting the system's time zone for accurate logging.
Defining a custom name for the unit and restoring it to factory default settings.
Overview of Wi-Fi interface configuration for signal characteristics and security.
Detailed settings for Wi-Fi interface, including SSID, channel, authentication, and encryption.
Guide to configuring internal unit parameters like DHCP server details and leasing.
Setting up the DHCP server and managing IP lease status and reservations.
Overview of advanced settings including firewall, authentication, security, filters, and dynamic DNS.
Configuring authentication, firewall, MAC/IP filters for network security and access control.
Setting up port forwarding rules and configuring Dynamic DNS for external access.
Guide to viewing and understanding various status parameters of the unit.
Displays device uptime, WAN info, WiMAX connection parameters, and general system status.
Information on software, telephony status, certificates, and unit details.
Configuration settings for Voice over Internet Protocol (VoIP) calls, including user accounts and call features.
Lists common problems and checks before contacting customer support for resolution.
To Next Page