8 ENGLISH
Playing Through a MicroTF Card
• Insert a memory card with files in an MP3 format into the MicroTF slot.
• To switch to the memory card playback mode, press the
button until you hear the voice
tag – TF card.
• Press the
or buttons to change tracks among the saved files.
Playing Through the AUX Input
• When an external device connects to the AUX input, the speaker mode automatically
changes and you will hear the voice tag – Audio input.
Note: In this mode, it is not possible to play/pause or change tracks with any speaker buttons.
Receiving Phone Calls
• Press the button to receive a call.
• Hold down the
button to reject a phone call.
Note: Answering phone calls is only possible when you pair the speaker with your phone
through Bluetooth.
Controlling the Volume
• Press down the or buttons to decrease or increase the speaker’s volume.
Note: The maximum volume is reached when the voice tag sounds with a beep. If the volume
appears low, check the volume set on the paired device.
Charging
Charging is indicated by a red blinking LED light that turns off after being fully charged.
INSTRUCTIONS
To Next Page