Amada AMFS07 - Important Safety, Tools, and Parts Information; Important Safety Information; Tools Needed (NOT Included); Supplied Parts and Hardware

• Check package contents against supplied parts and hardware list to ensure that all
components were received undamaged. DO NOT use damaged or defective parts. lf
you require replacement parts, please contact AMADA customer service at
support@amadahome.com.
• Carefully read all instructions before attempting installation. If you DO NOT under-
stand the instructions or have any concerns or questions, please contact customer
service at support@amadahome.com.
• NOT all parts and hardware included will be used.
• DO NOT use this product for any purpose that is NOT specified in this manual. DO
NOT exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use. Thank you for your
understanding.
IMPORTANT SAFETY INFORMATION
Tools Needed (NOT lncluded)
Stud Finder
Bracket
(A) x3
Board
(B) x3
Long Lag Screw
M4x50mm
(C) x6
Short Lag Screw
M4x30mm
(D) x15
Screw
M4x20mm
(E) x6
Pencil
Philips
Screwdriver
Level
Drill
5/64”(2mm)
Wood Drill Bit
1/4”(6mm)
Concrete Drill Bit
Supplied Parts and Hardware
Wall Anchor
13x42mm
x15
F
x15
G
Wall Anchor
M6x30mm
Before installation, please identify your wall type.
For wood stud installation, follow step 1A.
For drywall installation, follow step 1B.
For solid concrete and concrete block walls installation, follow step 1C.
Step 1 Secure the Bracket to the Wall
Hammer
CAUTION!
These wall anchors [F]
are for drywall ONLY.
DO NOT use them in
concrete / brick / wood
studs wall.
CAUTION!
These anchors [G] are
for concrete or brick
walls ONLY. DO NOT
use them in drywall or
wood studs.
01