8/20 Chapter 1 GENERAL DESCRIPTION
Issue 05/2010 OPERATOR’S MANUAL HFE M2 – X41176B
1.3. MACHINE SPECIFICATIONS
1.3.1. STANDARD STROKE
AMADA EUROPE S.A. constantly strives to improve its products, and reserves the right to
alter their characteristics at any time.
(1) - Value affecting the smallest allowable length of tools (§ 7.5).
(2) - The dimensions are with the arm and the NC maximum extended on the exterior, and all doors closed..
(3) - The dimensions are with the arm and the NC maximum extended in front, and all doors closed..
(4) - Les Weights are approximate and correspond to basic machines, for optional equipment, see § 4.2.1.
(5) - Standard distance pieces / Abutting distance pieces.
(6) - Machine power = Motor power + 3 kW.
50-12 50-20 80-25 100-30
130-30 170-30 170-40 220-40
kN 500 500 800 1000 1300 1700 1700 2200
kN 40 40 70 75 150 210 210 260
mm 1270 2090 2570 3110 3140 3170 4230 4280
mm 60 60 60 60 90 180 180 180
mm 960 960 960 960 960 960 960 960
mm 370 470 470 470 470 470 470 470
mm 150 200 200 200 200 200 200 200
mm 100 420 420 420 420 420 420 420
mm 1035 1665 2125 2705 2700 2700 3760 3760
bar 270 270 275 280 296 283 283 288
4 4 4 4 5 5 5 5
litres 55 55 90 110 150 235 235 295
mm 2710 3340 3800 4385 4440 4470 5530 5560
mm 2320 2450 2445 2430 2625 2625 2625 2625
mm 2300 2450 2540 2680 2815 2900 2890 3085
kg 3350 4600 5600 6600 8150 11600 13900 17100
6/8 10/13 13/17 15/21 15 / 21 16 / 21 21 / 28 21 / 28
mm 120 120 120 120 120 120 120 120
lg 835 mm 1 2 4 4 4 4 5 5
lg 415 mm 3 5 7 7 7 7 10 10
kW 4 4 7,5 7,5 11 15 15 18,5
20,7 32,6 32,6 41
mm/s 100 100 100 100 100 100 100 100
mm/s 10 10 10 10 1 à 10 1 à 10 1 à 10 1 à 10
mm/s 100 100 100 100
MODELS HF
Working line height
Nominal force
Minimum force (1)
Beam length
Table width
Max. pressure
Number of cycles
Oil capacity
UnitsDescription
Admission
Cylinder stroke
Throat depth
Distance between uprights
Motor power (6)
Max. return speed
Max. approach speed
Pump capacity
Max. working speed
Number of adj. Dist. pieces (5)
Height of distance pieces
Number of
tools
Length (overall) (2)
Width (overall) (3)
Height (overall)
Total weight(4)
To Previous Page
Loading...