AFR-200 Installation & Operation Guide Page 13
User Management
New Users
1. Go to the main menu and select User Mgt.
2. Select New User
3. Select User ID - enter the User ID by using the keypad and then pressing OK.
4. Click on Fingerprint
5. Select which finger you would like to use for verification.
6. Place finger on the fingerprint scanner until you hear a chime, lift finger and replace on
scanner until you hear a chime, and then repeat a third time. The screen will then show a
check mark to verify enrollment with fingerprint.
Confirmation of Fingerprint
To confirm that you have successfully
enrolled your fingerprint use the back
arrow to revert back to the AMANO
screen.
From the AMANO screen, place the
selected finger on the scanner. The
screen will show “verifying”. Once the
fingerprint is verified the screen will show
“FP Verified” and it will say “Thank you”.
To Next Page
Loading...
